MMC-24 APC to 3 x MTP-8 UPC Breakout Cable, 24 Fibers, OM4

Malaysian upgrade projects can use this configuration where its interface and fiber map align with both the installed cabling and the new hardware. This 24-fiber OM4 breakout pairs an MMC APC female trunk connector with three MTP-8 UPC female branches. The finished product addresses multimode fan-out designs that require APC specifically at the MMC interface and UPC at the MTP destinations. Its 2.5mm plenum trunk and factory-controlled branches come with a compact alternative to a cassette and multiple patch cords.

Product Highlights

• MMC Female to MTP® Female, 24 Fibers
• OM4 50/125μm, bend-insensitive fiber
• MMC insertion loss ≤0.35dB, return loss ≥40/27dB (MMC/MTP®)
• Harness Polarity wiring scheme
• 2.5mm Plenum (OFNP) cable
• Standard length options: 1m (3ft), 2m (7ft), 3m (10ft)

Specifications

Identifying the APC-to-UPC configuration

The polish change is intentional and must be matched at each mating point. Do not connect the UPC branches to APC adapters merely as the housings fit. All four connectors on the supplied cable are female and non-pinned. Validate guide-pin arrangements and document which of the three MTP-8 branches corresponds to every destination in the 24-fiber layout.

Connector performance and multimode reach

Insertion loss is 0.35dB maximum, with return loss of at least 40dB at the MMC APC end and 27dB at every MTP UPC end. OM4 attenuation is 2.3dB/km at 850nm and 0.6dB/km at 1300nm. These passive specifications should be evaluated with the optics’ power budget and the other mated pairs in the deployed link.

Length and branch-management guidance

The standard complete lengths are 1m (3ft), 2m (7ft) and 3m (10ft), with made-to-order meter or foot lengths available. Allow enough room to route three branches without sharply bending one to reach its port. Keep the breakout assembly supported and mark every MTP connector before bundling the legs with other OM4 cables.

Ordering and Factory Support

When seeking 24FMMCMTPOM4, provide the three-branch APC-to-UPC model, complete length and unit count. Made-to-order labels might define the MMC source and three destinations, reducing the chance of confusion with the APC-to-APC version. For Malaysian upgrades, our team can compare the requested build with the existing environment before production begins.