MMC-24 APC to 3 x MTP-8 APC Breakout Cable, 24 Fibers, OM4

Malaysian upgrade projects can use this configuration where its interface and fiber map align with both the installed cabling and the new hardware. The APC-to-APC version of the 24FMMCMTPOM4 breakout carries 24 OM4 fibers from one MMC APC female connector to three MTP-8 APC Elite female legs. All connection points use APC polish, and the breakout assembly follows factory harness polarity. It comes with three eight-fiber multimode paths in one compact, factory-completed assembly.

Product Highlights

• MMC Female to MTP® Female, 24 Fibers
• OM4 50/125μm, bend-insensitive fiber
• MMC insertion loss ≤0.35dB, return loss ≥40/45dB (MMC/MTP®)
• Harness Polarity wiring scheme
• 2.5mm Plenum (OFNP) cable
• Standard length options: 1m (3ft), 2m (7ft), 3m (10ft)

Specifications

A three-way fan-out with uniform polish

The supplied cable is right when the two the MMC infrastructure and all three MTP destinations are built for APC. The relevant connectors are female and non-pinned, meaning that pinned mates are appropriate throughout. determine that the application truly calls for three eight-fiber branches and that no further polarity reversal is introduced by the connected trunk or cassette before deployment.

Loss values for the complete optical path

The finished product is rated at 0.35dB maximum insertion loss, with at least 40dB return loss at MMC and 45dB at MTP APC. Use these connector-specific ratings when reviewing the passive link. OM4 behaviour at 850/1300nm supports multimode systems, but allowable distance and full connection count remain properties of the whole transceiver channel.

Installing and identifying three APC branches

Normal length options are 1m (3ft), 2m (7ft) and 3m (10ft), with customized cable lengths in feet or meters. Because three similar MTP connectors leave one fan-out, branch labels are more specifically valuable. Observe gentle routing around the breakout body, inspect each ferrule and cap any branch that is not equivalent to connected immediately.

Ordering and Factory Support

Provide 24FMMCMTPOM4 in the APC-to-APC three-leg configuration, with length and unit count. If the three branches terminate in different rack locations, come with the appropriate leg arrangement and labelling rather than relying on a universal fan-out drawing. For Malaysian upgrades, our team can compare the requested build with the existing environment before production begins.