Customized MTP Breakout Cable, 24F, OM4

Customized MTP Breakout Cable, 24F, OM4

Use this Customized breakout when one high speed port needs to serve multiple devices. fiber, 24 Fibers and jacket, fully tested on both the trunk side and every breakout leg.

Available lengths are 1m (3ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft) and 30m (98ft). We can also produce any intermediate or longer length to order, with your choice of labeling and packaging.

Product Highlights

  • Insertion loss ≤0.35/0.6dB (Elite/Standard), return loss ≥20dB (MTP-24), ≥27dB (MTP-8/MTP-12)
  • 3.0mm
  • Stock lengths from 1m (3ft) to 30m (98ft), custom lengths on request

Specifications

Part Number24FMTPOM4
ManufacturerHT
Fiber ConnectorUS Conec MTP®
Connector KeywayUp to Down
Fibre ModeOM4 50/125μm
GenderFemale/Male
Fiber Count24 Fibers
Cable Outside Diameter (OD)3.0mm
Flame RatingLSZH/Plenum (OFNP)
Test Wavelength850nm
Insertion Loss≤0.35/0.6dB (Elite/Standard)
Return Loss≥20dB (MTP-24), ≥27dB (MTP-8/MTP-12)

Applications

Common applications include splitting an 800G or 400G parallel port into multiple lower rate links, connecting a spine switch to several leaf switches, and fanning a trunk out to transceivers without a cassette. A 24-fiber MPO interface is the standard for 100GBASE-SR10 CFP, CFP2 and CPAK modules, and is equally at home in structured trunking between panels.

Breakout Geometry and Wiring

Because the breakout is made in the factory, every leg has controlled length and identical optical performance. The mapping from trunk fibers to breakout connectors follows the specified polarity, and custom mappings are available for special transceiver combinations.

Ordering Information

Ordering is simple: send us 24FMTPOM4 and your required lengths and quantities, and we return a factory quote the same working day. Small trial orders are welcome before you commit to a full project rollout.

Built to Your Spec

As a factory we can modify almost every detail of this product: length, jacket material and color, polarity, gender, breakout geometry, labeling and packaging. Non-standard variants are routine work for us, not a special project.

How We Pack

Every cable is protected with dust caps and individual packaging before being boxed for shipment. Batch test reports and your own part number labels can be included in each bag.

Logistics

Most orders leave our facility within a few working days. Courier, air freight and sea freight are all available, and we are happy to hand goods to your nominated forwarder in China.


Malaysia Fiber Optic Supplier

Malaysia Fiber Optics
Factory Address: Block 5, Wangtang Industrial Park,Nanshan Area, Shenzhen,China
Malaysia Office: 68000 Ampang,
Selangor, MY
https://www.fiberoptic.com.my