NVIDIA InfiniBand Compatible 400G QSFP112 AE AEC

The NVIDIA InfiniBand Compatible 400G QSFP112 AE AEC connects QSFP112 to QSFP112 ports at 400Gbps over Active DAC (AEC) fiber at 850nm. Because the optics are built into the cable ends, installation is plug and play with no separate transceivers to manage, and airflow inside the rack stays unobstructed. It is well suited to 400G Ethernet data center and cloud network environments. Standard lengths span 1m (3ft) to 3m (10ft).

Product Highlights

• QSFP112 to QSFP112
• Data rate: 400Gbps
• Cable type: Active DAC (AEC)
• Length: 3 standard lengths between 1m (3ft) to 3m (10ft)
• DDM/DOM: Supported
• Operating temperature: 0 to 70°C (32 to 158°F)

The NVIDIA InfiniBand Compatible 400G QSFP112 AE AEC connects QSFP112 to QSFP112 ports at 400Gbps in 400G Ethernet data center and cloud network environments. This unit is provided in 3 standard lengths from 1m (3ft) to 3m (10ft). Because the assembly is factory terminated and tested as a complete link, installation is plug and play on both ends. Our factory programs the compatibility coding for your switch brand before shipment and verifies each unit on real host equipment. The link runs 4x 100G-PAM4 modulation, which keeps it aligned with current 400G switch silicon.

Compliance: QSFP112 MSA, IEEE 802.3ck 400GBase-CR4, CMIS 5.0. Every unit's EEPROM coding and link behavior are verified on real host equipment in our lab, so what arrives at your site is ready to use.

This assembly is listed under part number QSFP-400G-AE. The cable is supplied in 1m (3ft), 2m (7ft) and 3m (10ft). Custom lengths beyond the standard range are available on request. Wire gauge: 32AWG.

Most orders travel by international express and arrive within days; palletized freight by air or sea is used for volume orders. If you prefer, we ship on your DHL, UPS or FedEx account, or deliver to your appointed agent in China for onward consolidation.

We do not ship untested stock. Each transceiver and cable is powered up in our test racks, checked for link stability, transmit power, receiver sensitivity and diagnostic readouts, and only then packed for delivery. This factory-level testing is one reason network integrators keep reordering from us year after year.

Each unit is sealed in an anti-static bag, cushioned in a blister tray and boxed in an export-grade carton. Outer cartons carry handling marks and can be palletized for air or sea freight. If your project requires retail boxes, barcodes or your own brand on the label, we can arrange that as well.

We have manufactured fiber optic connectivity products since 1995 and run our own production lines in Shenzhen. Beyond the standard catalog we build to order: special cable lengths, custom connector combinations, vendor-specific compatibility coding and private labeling. Send us your requirement and our engineers will quote a practical solution.