Generic DW2-QSFP100G80-2122 Compatible 100G QSFP28 Transceiver Module

Product Highlights

• Compatible alternative to Generic DW2-QSFP100G80-2122
• 100G connectivity at 100Gbps (2x50G)
• Optical wavelength: 1560.61nm,1559.79nm
• Specified reach: 80km with EDFA and TDCM
• Duplex CS/UPC / SMF interface
• Digital diagnostic monitoring: Supported
• Operating temperature: 0 to 85°C (32 to 185°F)

Specifications

Applications and Optical Link Design

Use this module for equipment interconnection over the specified single-mode fiber plant, including enterprise backbone, campus, metro or data-center interconnect links according to its rated distance. Confirm that both ends use the same optical standard and wavelength plan, and allow for connector, splice and patch-panel loss within the stated power budget.

Before deployment, check the host port type, supported data rate and firmware requirements. The 100G interface configuration must match the remote equipment; sharing a QSFP28 housing alone does not make two transceiver types interoperable.

For this 1560.61nm,1559.79nm interface, verify channel spacing and filter compatibility. Passive filters add loss even without active equipment, so assess 80km with EDFA and TDCM using the complete channel rather than fiber distance alone.

Optical Acceptance, Diagnostics and Handling

For this model, the specified transmit-power range is -1~4dBm; the stated optical power budget is 12dBm. Digital diagnostics make later maintenance easier when baseline values are captured at installation. Save the initial readings with the port and OEM reference, then investigate meaningful changes rather than reacting to a single transient value. Diagnostic support depends on the host as well as the module, so unavailable fields should be confirmed with the platform documentation. Diagnostic monitoring is listed as Supported. Before every insertion, keep dust caps in place until the patch lead is ready, avoid touching the optical end face and use an appropriate inspection and cleaning procedure. Do not look into an active optical interface.

Mixed-Vendor Network Operation

A mixed-vendor optical link should be documented at both ends, not treated as one generic connection. Confirm which OEM identity each host expects and whether both ends use the same wavelength plan and optical standard. Related links locate equivalent hardware, but brand-specific identification must still be selected independently. For this model, the principal parameters are data rate 100Gbps (2x50G), wavelength 1560.61nm,1559.79nm, rated reach 80km with EDFA and TDCM.

Generic Compatibility and Factory Testing

Compatibility testing for DW2-QSFP100G80-2122 combines identification with a live link and available transmit, receive and alarm information. Connector condition is inspected separately. Equipment model, hardware revision and software release can be reviewed before dispatch where platform behavior is uncertain.

Ordering Information

When ordering, specify DW2-QSFP100G80-2122, DW2-QSFP100G80-2122, quantity and intended host platform. Project labels can repeat these details for receiving and asset records. Neutral labels, customer packaging and project-specific compatibility review are available on request.

Quality Assurance and Packaging

Each DW2-QSFP100G80-2122 compatible module is inspected, powered up and functionally checked before protective packing. Dust caps and individual trays shield the interface during transport. Customer references, rack groups and project packing lists can be added for volume orders.

Frequently Asked Questions

Shipping and Lead Time

Standard configurations normally ship within one to three working days, with production lead times confirmed for larger quantities. International courier, air freight and sea freight are available; customer courier accounts and nominated forwarders are accepted.