Customized MPO-24 Harness, 8-144F, OS2

Customized MPO-24 Harness, 8-144F, OS2

Our MPO Female/Male harness cable gives you a direct MTP to LC duplex connection without any intermediate hardware. 24-144 Fibers (Base-24) on OS2 9/125μm fiber with Plenum (OFNP)/LSZH jacket, with each LC leg labeled for fast port mapping.

Available lengths are 1m (3ft), 2m (7ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft) and 30m (98ft). We can also produce any intermediate or longer length to order, with your choice of labeling and packaging.

Product Highlights

  • MPO Female/Male to LC/SC/FC/ST, 24-144 Fibers (Base-24)
  • OS2 9/125μm, G.657.A1
  • Type A/Type B/Type C polarity
  • Plenum (OFNP)/LSZH
  • Minimum bend radius 10mm
  • Stock lengths from 1m (3ft) to 30m (98ft), custom lengths on request

Specifications

Part NumberXXMPOXXSMF
ManufacturerHT
Connector AMPO Female/Male
Connector BLC/SC/FC/ST
Fiber ModeOS2 9/125μm
Wavelength1310/1550nm
Glass FiberG.657.A1
Minimum Bend Radius10mm
Polish TypeAPC to UPC/APC
PolarityType A/Type B/Type C
Cable JacketPlenum (OFNP)/LSZH
Trunk Outside Diameter (OD)3.0-11.7mm
Breakout Outside Diameter (OD)2.0mm (Duplex), 2.0/0.9mm (Simplex)
Fiber Count24-144 Fibers (Base-24)
MPO Connector IL≤0.35dB
MPO Connector RL≥60dB
Standard Connectors ILUPC≤0.2dB, APC≤0.3dB
Standard Connectors RLUPC≥50dB, APC≥60dB
Attenuation at 1310nm≤0.35dB/km
Attenuation at 1550nm≤0.21dB/km
Operating TemperatureOFNP: -10 to 60°C (14 to 140°F)LSZH: -10 to 70°C (14 to 158°F)
Storage TemperatureOFNP: -10 to 70°C (14 to 158°F)LSZH: -20 to 70°C (-4 to 158°F)

Applications

Typical uses include connecting a parallel optics port to multiple duplex LC ports, wiring between an MPO backbone and LC equipped switches or servers, and neat fan-out at the equipment rack. A 24-fiber MPO interface is the standard for 100GBASE-SR10 CFP, CFP2 and CPAK modules, and is equally at home in structured trunking between panels.

LC Legs and Port Mapping

Every LC duplex leg is factory polished and tested individually, with return loss well above the multimode or single mode requirement. The fan-out is compact and strain relieved, and the leg numbering matches the polarity table for error-free patching.

Ordering Information

To order, quote XXMPOXXSMF together with the length and quantity you need. Private labeling, custom packaging and project specific documentation are all handled in-house.

Quality and Testing

Our test routine covers insertion loss, return loss and ferrule end face inspection on every assembly. Because testing is done in-house, custom variants receive exactly the same verification as standard models.

How We Pack

Products are packed in anti-static or PE bags with connector dust caps fitted, then boxed in sturdy export cartons. Custom labels, barcodes and carton markings are available on request.

Logistics

Standard configurations normally ship within a few working days by DHL, UPS, FedEx, TNT or EMS. For project quantities we arrange air or sea freight, and we can ship on your own courier account or deliver to your appointed forwarder.


Malaysia Fiber Optic Supplier

Malaysia Fiber Optics
Factory Address: Block 5, Wangtang Industrial Park,Nanshan Area, Shenzhen,China
Malaysia Office: 68000 Ampang,
Selangor, MY
https://www.fiberoptic.com.my