MTP-24 to MTP-24 UPC Jumper, 24 Fibers, OM3, Type A

Factory assembled MTP® Elite Female jumper cable with 24 Fibers, OM3 50/125μm and Plenum (OFNP) jacket. Every unit is measured for insertion loss and return loss before packing, so the link budget you calculate on paper is the one you get in the rack.

Standard lengths are 1m (3ft), 3m (10ft), 5m (16ft), 7m (23ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft), 30m (98ft) and 40m (131ft). Because we are the manufacturer, any other length between or beyond these steps can be produced on request, with your choice of jacket color, labeling and packaging.

Product Highlights

• MTP® Elite Female (Non-Pinned) to MTP® Elite Female (Non-Pinned), 24 Fibers
• OM3 50/125μm, bend insensitive fiber
• Insertion loss ≤0.35dB (0.15dB Typ.), return loss ≥20dB
• Type A polarity (straight through)
• 3.0mm Plenum (OFNP) round cable
• Minimum bend radius 7.5mm
• Ten standard lengths from 1m (3ft) to 40m (131ft), custom lengths built to order

Typical applications for this jumper include patching between MPO cassettes and transceivers, connecting patch panels inside a cabinet, and structured links between adjacent racks. A 24-fiber MPO interface is the standard for 100GBASE-SR10 CFP, CFP2 and CPAK modules, and is equally at home in structured trunking between panels. Type controlled factory wiring keeps the polarity scheme consistent with the rest of your cabling system.

The same jumper can be produced with different polarity and gender combinations. Male connectors carry guide pins for direct module connection, while female versions are used at panels. Polarity A, B and C are all standard for us, and our engineers can check your link diagram if you are unsure which one to order.

Ordering is simple: send us 24FMTPOM3 and your required lengths and quantities, and we return a factory quote the same working day. The 1m (3ft) version is the standard model; Small trial orders are welcome before you commit to a full project rollout.

Standard configurations normally ship within a few working days by DHL, UPS, FedEx, TNT or EMS. For project quantities we arrange air or sea freight, and we can ship on your own courier account or deliver to your appointed forwarder.

Every MPO/MTP assembly leaving our factory is 100% tested for insertion loss and return loss, with end face geometry checks on the multi-fiber ferrules. Controlled polishing keeps the loss budget stable across the whole batch, which matters when several mated pairs sit in one link.

Our engineering team handles custom MPO/MTP assemblies daily. If the standard configuration does not match your link design, send us the requirement and we will build exactly what your network needs at factory-direct cost.